SRT screw removal tool

As far as the SRT tool, the clinician will place the tip of it in the screw so it lines up into the screw hole opening. They will turn the tool slowly about ¼ of a turn clockwise, then immediately screw counterclockwise. As the doctor turns in a COUNTER-CLOCKWISE direction, the tip of the tool will burrow into the screw opening while at the same time unscrew it out of the implant.

Once the screw is out, to remove the tool from the removed screw, they will have to turn the tool CLOCKWISE.
 
Remember the SRT is for a stripped internal hex of the screw that the .050 hex tool will not engage