1. Physical And Chemical Properties Of Commercially Available Mineralized Bone Allograft (1.2MB)
David C. Greenspan, Ph.D. (6381, Rev. 12/12)
2. Tilted Implants for a Mandibular Hybrid Prosthesis (1.8MB)
James A. Rivers, DMD (ZD1078)
3. Zimmer Angled Tapered Abutments: Restorative Solutions for Tilted Implant Protocols (388KB)
Ayra Maggay (6327, Rev. 11/11)
4. Retrospective Clinical Evaluation of Tapered Screw-Vent Implants: Results After up to Eight Years of Clinical Function (165KB)
Z. Ormianer and A. Palti (A1015)
5. Osteoinductivity of Puros DBM Putty in Athymic Rat Model (3MB)
S. Moore and R. Cobb RTI Biologics, Inc. (1119, Rev. 2/09) As seen in Dental Inc.
6. Modification of a Conventional Denture for Use as an Implanted-Retained and Stabilized Overdenture (1MB)
M. Collins and M. Warner (4738, Rev. 8/09)
7. Osteoinductivity of Puros DBM Putty in Athymic Rat Model (3MB)
S. Moore and R. Cobb RTI Biologics, Inc. (1119, Rev. 2/09)
8. Puros Demineralized Bone Matrix: Patient Safety Through Redundant Safeguards (180KB)
Zimmer, Inc. (1109, Rev. 2/09)
9. Effect of Terminal Gamma Sterilization on Osteoinductivity (127KB)
C. Nataraj, E. Silveira, J. Clark, J. Yonchek, and J. Kirk (1140, Rev. 2/09)
10. Histology of Surgically Implanted Tutoplast Processed Dermis (4MB)
D. Greenspan, R. Hernandez, and J. Faleris (1077, Rev. 4/09)
11. Puros Demineralized Bone Matrix: Patient Safety Through Redundant Safeguards (245 KB)
RTI Biologics, Inc. (1103, Rev. 1/09)
12. Management of the extraction socket: Site preservation prior to implant placement (466 KB)
B. Danesh-Meyer
13. Ridge Preservation & Augmentation Using Regenerative Materials to Enhance Implant Predictability and Esthetics (722 KB)
D. Keith & M. Salama (A965)
14. Heat generation in one-piece implants during abutment preparation with high-speed cutting instruments (280 KB)
W. Joo (A998)
15. Allograft Safety: Efficacy of the Tutoplast Process (955 KB)
C. Schoepf (A815)
16. Zimmer® Contour Ceramic Abutments Precision-Engineered for Strength, Esthetics and Clinical Versatility (350 KB)
W. Joo (A985)
17. One-piece and Two-Piece Implants Demonstrate Comparable Stress Levels in Bone: Preliminary Results of an FEA Study (199 KB)
S. Zamani (A991)
18. The Evolution and Evaluation of Two Interference-Fit Implant Surfaces (1MB)
P. Binon (A959) *As seen in Postgraduate Dentistry
19. A Comparison of Three Mechanical Properties of Four Implant Designs (1MB)
C. Basten (A958) *As seen in Postgraduate Dentistry
20. Management of the Compromised Intertooth Space with Small-Diameter One-Piece Implants in the Esthetic Zone (688KB)
P. Petrungaro (A956) *As seen in Functional Esthetics and Restorative Dentistry
21. The Use of a Mineralized Allograft for Sinus Augmentation: An Interim Histological Case Report from a Prospective Clinical Study (9MB)
S. Froum (PN A721)
22. A Review of Zimmer-Coated Dental Implants (2.3MB)
O. Tanaka (PN A934) *Reprinted with permission from Dental Asia, May/June 2007.
23. Smart Steps to Immediate Implant Impressions (1.5MB)
J. Rosenlicht (PN A621)
24. All Ceramic Restorative System for Esthetic Implant-Supported Crowns: In Vitro Evaluations and Clinical Case Report (152KB)
P. Castellon (PN A639)
25. A569 SwissPlus(tm) Implant System, Part 1: Surgical Aspects and Intersystem Comparisons, Vol. 11 #2(2.3KB)
Joel L. Rosenlicht, DMD, Implant Dentistry
*Lippincott, Williams and Wilkins, publisher, permits the printing of one copy of this article per viewer/site visitor. Additional copies should be purchased directly from the publisher.
26. A568 SwissPlus(tm) Implant System, Part 2: Prosthodontic Aspects and Intersystem Comparisons, Vol. 11 #3, pp249-255 (1.8KB)
Joel L. Rosenlicht, DMD, Implant Dentistry
*Lippincott, Williams and Wilkins, publisher, permits the printing of one copy of this article per viewer/site visitor. Additional copies should be purchased directly from the publisher.
27. Highly Crystalline MP-1TM Hydroxylapatite coating Part I (4.8KB)
Ann V. Burgess, et al
28. Highly Crystalline MP-1TM Hydroxylapatite coating Part II (5.4KB)
Ann V. Burgess, et al
29. Immediate Implant Placement and Provisionalization (206KB)
Paul S. Petrungaro, DDS, MS
30. Using Platelet-Rich Plasma (205KB)
Paul S. Petrungaro, DDS, MS
31. Immediate Loading of Dental Implants in the Edentulous (163KB)
Azfar A. Siddiqui, DMD, BDS, MSc
32. PureForm Ceramic Restorative System (235KB)
Paulino Castellon, DDS,* James L. Soltys, DDS
33. Dental Implants in the Esthetic Zone
Abdel El Salam El Askary, BDS
34. Clinical Dilemmas: Restoration of Posterior Quadrants in the Partially Edentulous Dentition -- 9 Year Retrospective Cumulative Study
Martin Gross, BDS, LDS, MSc
35. Determining The Right Occlusal Scheme for Dental Implants
Marcel G. Le Gall, DDS
36. Should Implant Superstructures Be Screw- Retained Or Cement-Retained?
Rainer Niess, DDS
37. Achieving Optimal Implant Placement Using Mandibular Block Autografts: A Biological and Biomechanical Approach to Avoid Functional and Esthetic Complications
Michael A. Pikos, DDS
38. Clinical Evaluation of the Spline Interface
Philippe Russe, DDS
39. Implant Surfaces: Present and Future
Paolo Trisi, D.D.S., Ph.D.
40. Immediate Loading of AdVent™ Implants with a Mandibular Bar Overdenture Restoration: Technique from an International, Prospective, Multicenter Study
Azfar A. Siddiqui, DMD, BDS, MS
41. The Nonfunctional Immediate Provisional in Immediate Extraction Sites: A Technique to Maximizes Esthetics
William M. Locante, DDS